This machine I believe was found in our customer’s grandfathers barn. It apparently sat in moisture or water for a while as the base came apart when we disassembled the machine. So out came the welder! The other challenge we had was that the vending mechanisms were all rusted and stuck. Lots of fine sanding, blasting, grease and patience, but we finally got it back in working order.
Restoration of a rusted Vendo 39
Hurricane Ian Almost Destroyed this Vendo 44 When Hurricane Ian hit the west coast of Florida in the fall of 2022, most […]
We just finished this Vendo 81B Full Restoration. (The images were taken before we installed the cooling system and kickplate. ) This […]
This is a versatile little machine We just finished this Cavalier 55 machine for a customer in Alabama. Today, the Vendo 44 […]
